McKinney MCK-HS303/MCK-HS3703 Hinges

This half-surface pin and barrel continuous hinge can be used to repair and replace existing hinges on both fire-labeled and non-labeled openings.

The hinge fits into the gap left after standard butt hinges are removed. It can assist in reversing the handing of a door, or to reverse the swing of a door hung in an evenly-rabbeted frame.

MCK-HS303

  • 3⁄16" diameter stainless steel barrel type hinge pin Medical bearings. Stainless steel end pins 
  • Heavy-duty 14 gauge, 304 stainless steel, finished in US32D (630). Covers are extruded aluminum with brushed aluminum finish 
  • Fasteners concealed when door is closed. Fastener screw pack includes Custom 12-24 x 11/16 S.S Phillips Flat Head Undercut TEKScrews, 1/4-14 x 3/4 Security TORX TEK Screws, Zinc #8 x 3/4" PFH Tek, Zinc, Cover Clip
  • ANSI/BHMA Standard A156.26 Grade 1

MCK-HS3703

  • 3⁄16" diameter stainless steel barrel type hinge pin (rod). Medical bearings. Stainless steel end pins 
  • Heavy-duty 14 gauge, zinc plated 1012 carbon steel
  • No exposed mounting fasteners when closed. Fastener screwpack includes Custom 12-24 x 11/16 S.S Phillips Flat Head Undercut TEK Screws, 1/4-14 x 3/4 Security TORX TEK Screws, Zinc #8 x 3/4" PFH Tek, Zinc, Cover Clip
  • MCK-HS303 Optional features include US32 bright polished stainless (629), custom lengths (specify handing and length in inches), custom hole patterns, tamper-proof security screws, 1-5/8" stainless steel sleeve bolts
  • Supports weights up to 600lbs. 4'0" maximum door width 
  • Symmetrically templated hole pattern. Handing required for 6'8" and 7'2" and for most optional features 
  • Exterior barrel diameter .438 (7⁄16") 
  • When installed on a 16 gauge (or heavier) metal frame, hinge reinforcements are not required, nor are they recommended. However, if the frames are equipped with mortise hinge reinforcements, removal is not advised 
  • Please call the factory at 800-346-7707 for instructions on unevenly-rabbeted frames

Related Templates

For Pin and Barrel Hinge Templates, see the Template Library.