McKinney Pocket Pivot Hinges - PH-4

Recommended for applications where use of the full width of the corridor is required, such as cross corridor and smoke and fire doors as well as patient room doors.

  • The Full Mortise Pocket Pivot Hinge is designed to give a flush appearance to the corridor when the door is open and recessed into a pocket in the corridor wall
  • For single and cross corridor doors, the PH-4 allows the door to lay against the wall with no projection into the opening and no gap between the door and frame
  • When combined with a floor closer, this application has minimum visible hardware and clearances
  • The PH-4 Full Mortise Pocket Pivot Hinge meets material and performance requirements of NF PA-80
  • and ANSI A-156-1
  • Meets or exceeds AN SI A117.1 – 1986 Providing Accessibility and Usability for Physically Handicapped People
  • Two thrust bearings for vertical loads
  • Roller bearing for lateral support
  • Listed for both hollow metal or steel covered composite fire doors rated up to 3 hours
  • Listed for wood core type fire doors rated 20 minutes
  • Non-handed

Related Templates

226 for 6.25 x 1-17/32 for PH-4

Related Installation Instructions